SOS Bags – Unipak

Skip to content

Food Packaging

Bio Products

Bamboo and Wood

Paper Products

Plastic Products

Containers (PP)

Containers (PET)

For exact prices provide the quantity you intend to order. Contact us about additional discounts for bulk orders or product customisation.

Pattern 01

Ice-Blue

Pattern 01

Blue-Gold

Pattern 01

Red-Gold

Pattern 01

Sakura

Pattern 01

Momiji

Pattern 01

Pattern 26

Pattern 01

Pattern 24

Pattern 01

Pattern 21

Pattern 01

Pattern 23

Pattern 01

Pattern 20

Pattern 01

Pattern 13

Pattern 01

Pattern 10

Pattern 01

Pattern 06

Pattern 01

Pattern 02

Pattern 01

Pattern 01

PLA – polylactic acid

Thermoplastic polyester obtained by condensation or polymerisation of lactic acid. The lactic acid monomer is obtained from fermented plant starch (corn, sugarcane, etc.). Mechanical properties range from soft and elastic to stiff and high strength. Heat-resistant, non-toxic, biodegradable.

PVC – polyvinyl chloride

Polymer made from vinyl chloride monomers by polymerization. Polyvinyl chloride is a heavy, stiff, ductile, medium strong, amorphous, transparent material. Excellent resistance to chemicals (acids and bases), grease, and oil.

BOPS – biaxially oriented polystyrene

Formed by stretching a polystyrene film in two different directions. Increases transparency, and also stiffness.

OPS – oriented polystyrene

Aromatic polymer made from styrene monomers by polymerization. Produced by stretching extruded polystyrene film, improving visibility through the material by reducing haziness and increasing stiffness. Clear, hard, and brittle with a relatively low melting point.

PS – polystyrene

Aromatic polymer made from styrene monomers by polymerization. Clear, hard, and brittle with a relatively low melting point. Foaming produces an opaque, rigid, lightweight material with impact protection and thermal insulation properties.
OPS: Oriented polystyrene
BOPS: Biaxially oriented polystyrene

PP – polypropylene

Polyolefin made from propylene, a gaseous hydrocarbon, using catalysts. Harder, denser, more heat-resistant, and more transparent than polyethylene.

HDPE – high density polyethylene

Polyolefin made from ethylene, a gaseous hydrocarbon, using catalysts. Stiff, strong, tough, resistant to chemicals and moisture, permeable to gas, easy to process, and easy to form.

LDPE – low density polyethylene

Polyolefin made from ethylene, a gaseous hydrocarbon, using catalysts. Flexible, strong, tough, easy to seal, and resistant to moisture, relatively transparent.

PE – polyethylene

Polyolefin made from ethylene, a gaseous hydrocarbon, using catalysts.
Classified by density:
LDPE: flexible, strong, tough, easy to seal, and resistant to moisture, relatively transparent.
HDPE: stiff, strong, tough, resistant to chemicals and moisture, permeable to gas, easy to process, and easy to form.

PC – polycarbonate

Polyester containing carbonate groups, made from bisphenol A and phosgene. Clear, heat resistant, and durable. Harsh cleaning detergents catalyze the release of bisphenol A and are a potential health hazard.

PET – polyethylene terephthalate

Polyester made from ethylene glycol and dimethyl terephthalate or terephthalic acid. Good gas and moisture barrier, good resistance to heat, mineral oils, solvents, and to acids, but not to bases. Glass-like transparency, light weight, shatter resistant.